Wheels
Quick Reference
( Mouse over links )
CIW Series
HLT Series
MRW Series
PAW Series
PHW Series
POW Series
PPW Series
PUW Series
RPWFC Series
RPWRB Series
SEW Series
SPW Series
V Groove wheels
FSVGW Series
PHVGW Series
SPVGW Series
VGW Series
Cast Iron / Semi-Steel Wheels - CIW
  • High capacity.
  • Long Wearing.
  • Solid web design.
  • Abrasive resistance.
  • Rust inhibitive black paint.
  • High tensile strength material.
  • Roller bearing for easy operation.
  • Grease fitting in the hub for lubrication.
  • Can be operated in extreme cold and heat temperatures.
  • Rounded edges on wheel face to minimize the floors wear.
Hi-Lo Temperature Wheels - HLT
  • Recyclable.
  • Long wearing.
  • Low rolling resistance.
  • Resistance to acids and oils.
  • Quiet operating movements.
  • Durometer 60/65 -- Shore"D".
  • Floor protection non-marking tread.
  • Operating temperatures: minus 70 to plus 550 degrees Fahrenheit.
  • Stainless Steel Ball Bearings are recommended for high temp. usage.
Moldon Rubber Wheels - MRW
  • Shock absorbent.
  • Cushioned Rubber tread.
  • Rust inhibitive black paint.
  • Quiet operating movements.
  • Durometer 70 to 80 Shore "A".
  • Rubber molded on to semi-steel cores.
  • Grease fitting in the hub for lubrication.
  • Roller/Tapered bearing for easy operation.
  • Operating temperatures minus 32 to plus 150 degrees Fahrenheit.
  
Polyurethane on Aluminum - PAW
  • Quiet operating movements.
  • Resistance to acids and oils.
  • Durometer 90-100 Shore "A".
  • Crown treaded for easy rollability
  • Floor protection non-marking tread.
  • Polyurethane molded to aluminum cores.
  • Operating temperatures: minus 32º to plus 175ºF.
  • Roller/Big hub diameter for ball bearing for easy operation.
Phenolic Wheels - PHW
  • Shock resistant.
  • Roller bearing for easy operation.
  • Non-marking floor protection compound.
  • Molded with macerated canvas and Phenolic resin compounds.
  • Operated temperatures: minus 65 to plus 300 degrees Fahrenheit.
Polyolefin Wheels - POW
  • Recyclable.
  • Long wearing.
  • Low rolling resistance.
  • Resistance to acids and oils.
  • Quiet operating movements.
  • Durometer 60/65 -- Shore"D".
  • Floor protection non-marking tread.
  • Operating temperatures: minus 32 to plus 180 degrees Fahrenheit.
Polyurethane on Polypropylene -- PPW
  • Low rolling resistance.
  • Resitance to acids and oils.
  • Quiet operating movements.
  • Durometer 90/100 -- Shore"A".
  • High impact Polypropylene core.
  • Floor protection non-marking tread.
  • Grease fitting in the hub for lubrication.
  • Operating temperatures: minus 32 to plus 180 degrees Fahrenheit.
  • Unique mechanical Interlocking system between core O.D. and tread.
Polyurethane on Cast Iron core Wheel - PUW
  • Rust inhibitive black paint.
  • Quiet operating movements.
  • Resistance to acids and oils.
  • Durometer 90-100 Shore "A".
  • Floor protection non-marking tread.
  • Grease fitting in the hub for lubrication.
  • Polyurethane molded to semi-steel cores.
  • Roller/Tapered bearing for easy operation.
  • Operating temperatures: minus 32º to plus 175ºF.
Rubber on Poly Wheels - RPWFC
  • Shock absorbent.
  • Quiet operating movements.
  • Cushioned Grey Rubber tread.
  • Durometer 60 to 70 Shore "A".
  • Excellent for washing enviornments.
  • Grease fitting in the hub for lubrication.
  • Resistance to chemicals, water and steam.
  • Roller/Ball/Delrin bearing for easy operation.
  • Thermoplastic Rubber molded on to a Polyolefin wheel core.
  • Operating temperatures minus 45 to plus 180 degrees Fahrenheit.
  • Unique mechanical Inter-locking system between core O.D. and tread.
Rubber on Poly Wheels - RPWRB
  • Shock absorbent.
  • Quiet operating movements.
  • Cushioned Grey Rubber tread.
  • Durometer 60 to 70 Shore "A".
  • Excellent for washing enviornments.
  • Grease fitting in the hub for lubrication.
  • Resistance to chemicals, water and steam.
  • Roller/Ball/Delrin bearing for easy operation.
  • Thermoplastic Rubber molded on to a Polyolefin wheel core.
  • Operating temperatures minus 45 to plus 180 degrees Fahrenheit.
  • Unique mechanical Inter-locking system between core O.D. and tread.
Solid Elastomer Wheel - SEW
  • Less maintenance.
  • Resistance to acids and oils.
  • Quiet operating movements.
  • Durometer 70/80 Shore "D".
  • High impact Elastomer compound.
  • Floor protection non-marking tread.
  • Effortless rolling under extreme loads.
  • Excellent for wash down environments.
  • Wheels are straight sided for extra strength.
  • Sealed precision ball bearings for easy rollability.
Solid Polyurethane Wheels - SPW
  • Non-conductive.
  • Durometer 70 Shore"D".
  • High impact Polyurethane.
  • Resistance to acids and oils.
  • Quiet operating movements.
  • Roller Bearing for easy operation.
  • Floor protection non-marking tread.
  • Excellent for wash down environments.
Forged Steel V-Groove Wheels - FSVGW
  • High capacity.
  • Long wearing.
  • Abrasive resistance.
  • Rust inhibitive black paint.
  • High tensile strength material.
  • Roller bearing for easy operation.
  • Grease fitting in the hub for lubrication.
  • Accurately machined to fit into the angle iron tracks.
  • Can be operated in extreme cold and heat temperatures.
Available Options
Phenolic V - Groove Wheels - PHVGW
  • Shock resistant.
  • Roller bearing for easy operation.
  • Non-marking floor protection compound.
  • Molded with macerated canvas and Phenolic resin compounds.
  • Operated temperatures: minus 65 to plus 300 degrees Fahrenheit.
Available Options
Solid Polyurethane V-Groove Wheels - SPVGW
  • High capacity.
  • Long wearing.
  • High tensile strength material.
  • Roller bearing for easy operation.
  • Exceptional wash down environments.
  • Temperature Range: 20 to 150 degrees.
  • Accurately machined to fit into the angle tracks.
  • Resistance to Chemicals, acids, oils and caustics.
  • Non-marking floor protective one- piece construction wheel.
V-Groove Wheels - VGW
  • High capacity.
  • Long wearing.
  • Abrasive resistance.
  • Rust inhibitive black paint.
  • High tensile strength material.
  • Roller bearing for easy operation.
  • Grease fitting in the hub for lubrication.
  • Accurately machined to fit into the angle iron tracks.
  • Can be operated in extreme cold and heat temperatures.


Polyurethane on Cast Iron core Wheel - PUW
Standard Features

  • Rust inhibitive black paint.
  • Quiet operating movements.
  • Resistance to acids and oils.
  • Durometer 90-100 Shore "A".
  • Floor protection non-marking tread.
  • Grease fitting in the hub for lubrication.
  • Polyurethane molded to semi-steel cores.
  • Roller/Tapered bearing for easy operation.
  • Operating temperatures: minus 32º to plus 175ºF.
 
Wheels Bearings Part Number Capacity
Diameter Width Hub Length Type Size   in Pounds
4" 1-1/2" 1-5/8" ---- 1-3/16" PUW-0415-19 650
Roller 3/4" PUW-0415-12
Roller w/Spanner 1/2" PUW-0415-08
4" 2" 2-3/16" ---- 1-3/16" PUW-0420-19 700
Roller 3/4" PUW-0420-12
Roller w/Spanner 1/2" PUW-0420-08
5" 1-1/2" 1-5/8" ---- 1-3/16" PUW-0515-19 750
Roller 3/4" PUW-0515-12
Roller w/Spanner 1/2" PUW-0515-08
5" 2" 2-3/16" ---- 1-3/16" PUW-0520-19 900
Roller 3/4" PUW-0520-12
Roller w/Spanner 1/2" PUW-0520-12
6" 2" 2-3/16" ---- 1-3/16" PUW-0620-08 1200
Roller 3/4" PUW-0620-16
Roller w/Spanner 1/2" PUW-0620-12
6" 2-1/2" 2-3/4" ---- 1-15/16" PUW-0625-19 1600
Roller 1" PUW-0625-12
Roller w/Spanner 3/4" PUW-0625-08
6" 3" 3-1/4" ---- 1-15/16" PUW-0630-31 2100
Roller 1" PUW-0630-16
Roller w/Spanner 3/4" PUW-0630-12
8" 2" 2-1/4" ---- 1-3/16" PUW-0820-19 1500
Roller 3/4" PUW-0820-12
Roller w/Spanner 1/2" PUW-0820-08
8" 2-1/2" 2-3/4" ---- 1-15/16" PUW-0825-31 2000
Roller 1" PUW-0825-16
Roller w/Spanner 3/4" PUW-0825-12
8" 3" 3-1/4" ---- 1-15/16" PUW-0830-31 2500
Roller 1" PUW-0830-16
Roller w/Spanner 3/4" PUW-0830-12
10" 2-1/2" 2-3/4" ---- 1-15/16" PUW-1025-31 2300
Roller 1" PUW-1025-16
Roller w/Spanner 3/4" PUW-1025-12
10" 3" 3-1/4" ---- 1-15/16" PUW-1030-31 3000
Roller 1" PUW-1030-16
Roller w/Spanner 3/4" PUW-1030-12
Tappered 3/4" PUW-1030-12-TB
~ Capacity ratings are based on manual operation.
Tapered and Ball bearings are available on all sizes.
For Radial Ball bearing add RBB at the end of the part number.
"QUALITY IS OUR TOP PRIORITY" ISO 9001 - 2008 Certified